If you are VAT registered and do construction work for a contractor who is also VAT registered and pays you under the Construction Industry Scheme (CIS), you normally do not add VAT to your invoice. Instead, the invoice shows how much VAT is due, says the reverse charge applies, and the contractor pays that VAT to HMRC themselves. It does not apply to work for homeowners, or to a business customer that has told you in writing it is an end user. The VAT rules below were checked against HMRC's technical guide to the reverse charge on 16 November 2026.

If a contractor's accounts team has sent your invoice back asking why it has VAT on it, this is usually why.

Does it apply to this invoice?

HMRC's guide says the reverse charge applies to invoices with a tax point on or after 1 March 2021 when all of these are true:

  • You are VAT registered, and so is your customer.
  • The work is within the scope of CIS, and your customer has to report the payment under CIS.
  • The work is standard rated or reduced rated, not zero rated.
  • Your customer has not told you in writing that they are an end user or an intermediary supplier.

If any one of them is not true, you invoice with VAT in the normal way. The common cases where it does not apply:

  • Homeowners. A private domestic customer is not VAT registered, so the reverse charge cannot apply.
  • End users. A business that is VAT and CIS registered but does not sell the building work on, such as a company having its own offices refitted. It can tell you in writing, by letter, email or in the contract, and then you charge VAT normally.
  • Intermediary suppliers. A business connected or linked to an end user, such as a landlord buying work it passes on to a tenant. The same written notice applies.
  • Zero-rated work, such as zero-rated work in the course of building a new home. HMRC's guide is clear that standard-rated services on new-build housing still fall under the reverse charge, so check the VAT rate on each job rather than assuming. VAT Notice 708 covers which new-build work is zero rated.
  • Supplies of staff by employment businesses.

HMRC's guide says that if you have no written notice that the customer is an end user, and the other conditions are met, you must use the reverse charge. If a customer gives you an end user notice that turns out to be wrong, HMRC says the customer, not you, is liable for the VAT.

What the invoice has to show

The invoice still needs everything a normal VAT invoice has. On top of that, according to HMRC's guide, it must:

  • Include the words "reverse charge". HMRC's guide says the VAT regulations require this reference.
  • Say that the reverse charge applies. HMRC gives "VAT Act 1994 Section 55A applies", "S55A VATA 94 applies" and "Customer to pay the VAT to HMRC" as wording that meets the requirement.
  • State how much VAT is due under the reverse charge, or, if your software cannot show the amount, state the rate. If the amount cannot be shown, HMRC says to add "customer to account to HMRC".
  • Not include the VAT in the amount the customer pays you.

A worked example

A VAT-registered plasterer finishes work on an extension for a main contractor who is VAT and CIS registered. The contractor is building the extension for a homeowner, so the contractor is not the end user. The figures are made up to show the layout.

LineAmount
Plastering, rear extension, 14 Mill Lane (labour and materials)£4,000.00
VAT at 20% under the reverse charge£800.00
Amount due from you (before any CIS deduction)£4,000.00

Under the table: "Reverse charge: Customer to pay the VAT to HMRC. VAT Act 1994 Section 55A applies."

The standard rate of 20% is from GOV.UK's VAT rates page, checked on 16 November 2026. Materials supplied as part of the job are part of a single supply, so the reverse charge covers the whole invoice, not just the labour. HMRC's guide adds that the single supply idea applies only to VAT, not to CIS. The contractor will still take any CIS deduction from the labour part of the £4,000, so less than that will arrive, which is why it helps to show labour and materials as separate lines. See CIS for subcontractors for how the deduction works.

The 5% rule

If the reverse charge part of a contract is 5% or less of its total value, you and the customer can agree to ignore it and invoice with VAT normally. HMRC's guide says this has to be agreed at the start, on the value of the whole contract, not invoice by invoice.

Plan for the cash flow

Under normal rules, the VAT you charge sits in your account until your VAT return is due. Under the reverse charge, it never arrives, and you may find you are reclaiming more VAT than you owe. HMRC's guide says subcontractors should plan for this, and that you can apply to move to monthly VAT returns through your online VAT account, so refunds come back sooner.

If you use the Cash Accounting Scheme, HMRC's guide says you cannot use it for reverse charge supplies. You can stay on the scheme for your other work, but reverse charge invoices go through your return on normal rules.

Where software helps

Most of the risk is in getting the invoice right every time. If your invoicing software lets you mark a customer or job as reverse charge, it can add the wording, show the VAT and leave it out of the total without you remembering. If it cannot, set up a separate invoice template for reverse charge customers. Either way, ask each new business customer, when you first quote, whether they are VAT and CIS registered and whether they are an end user, and keep their answer with their customer record.

What to do this week

  1. List your business customers and mark which are VAT and CIS registered contractors.
  2. For each one, check whether you have written notice that they are an end user or intermediary supplier.
  3. Add the reverse charge wording and VAT line to an invoice template for those that are not.
  4. Look at your next three months of VAT. If you will be reclaiming more than you owe, consider asking HMRC to move you to monthly returns.
  5. If you use the Cash Accounting Scheme, make sure your software treats reverse charge invoices outside it.
  6. If anything about a customer is unclear, check with your accountant before the next invoice goes out.